RE: Toriod ? Bendaway_Plus, stainless, titanium stabilized

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Rich & DJ" <rdj@xxxxxxxxxxxx>

If you want to use 12" dia the smallest circle you can form with it is
86" on the outside, 37" bend radius, weight 1.83 per ft, cost about $800
a section then there is shipping. It is great, we used it in duct work
for our clean room and vents for diffusion pumps because of the
hydrofluoric acid fumes.
Rich from the middle of Missouri

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Monday, September 04, 2006 12:40 AM
To: tesla@xxxxxxxxxx
Subject: Toriod ? Bendaway_Plus, stainless, titanium stabilized

Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>

Hi,

Has oneone looked into this product before? It claims resilance and
looks it
to have it in spades. No bends or dent likely on this excepting extended
drop tests maybe.

It looks to be somewhat smooth too. Coat with alum tape?

I'm wanting to build a 54"x12" toriod. Maybe we can get a sample piece?
I
wonder what the wieght is per foot?

Jim Mora

The message is ready to be sent with the following file or link
attachments:

Shortcut to: http://www.ducting.com/Bendaway_Plus.html