For now, I am looking at using the nice big iced tea bottles for the
primary tank cap. Maybe when I tire of that, I will look further
into a GOOD MMC. Maybe i'll string a few up, and use them in the
filter anyways, just to get the thing together. I will be testing
one of them with just a spark gap, and the NST (with the power
wasting filter) just for grins. My G/F already thinks I'm nuts!
Thanks for the info...
On 9/20/06, Tesla list <<mailto:tesla@xxxxxxxxxx>tesla@xxxxxxxxxx> wrote:
Original poster: "Lau, Gary" <<mailto:Gary.Lau@xxxxxx>Gary.Lau@xxxxxx>
Hi Slurp (?):
I think you're right about it being too good to be true. Based on the
small size I would guess that these are mylar units, and not at all
suited for high current pulse discharge applications. No harm in trying
them, but don't be too surprised if they fail. And while you're correct
in that such caps might be suitable for use in an R-C filter, the
capacitance is rather on the high side. You want roughly 500pF for the
filter, and these are six times that, which would end up wasting a lot
of power.
Chalk it up to experience, and look elsewhere for caps. There are on
rare occasions surplus caps that might be suitable for TC use, but
unless you really know caps or ask here first, I'd recommend using
either Cornell Dubilier 942 series caps, or using glass bottle caps.
You may also want to reconsider the gap construction and use parallel
copper pipes rather than just bolts.
Regards, Gary Lau
MA, USA