Re: Spark gaps (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Thu, 2 Aug 2007 12:01:01 -0500
From: resonance <resonance@xxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: Spark gaps (fwd)




A good RSG is required around 5 kVA and upwards.

With 5-12 kVA run 1/2" dia. brass feedthrus, 1.5 inches long, with 
replaceable 1/2" dia. tungsten tips.  Stationary electrodes are 1 inch dia. 
tungsten, screw-in type.  2 x 2 inch dia brass block as stationary holders. 
12" dia. x 1/2 inch G-10 rotor.   10 electrodes 3450 rpm. 1/2 HP motor.

above 12 kVA, run 1" dia. brass feedthrus, 2.0 inches long, with replaceable 
screw-in 1" tungsten tips.  Stationary electrodes are 1.5 inch dia..   3 x 3 
inch dia. brass block heatsinks as stationary holders.  18" dia. rotor x 
1/2" G-10.  10 electrodes 1725 rpm., 1HP motor.



Dr. Resonance
Resonance Research Corp.
www.resonanceresearch.com


----- Original Message ----- 
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Thursday, August 02, 2007 11:16 AM
Subject: Spark gaps (fwd)


>
> ---------- Forwarded message ----------
> Date: Thu, 02 Aug 2007 11:09:45 -0500
> From: Matthew Boddicker <shmerpleton_town@xxxxxxxxxxx>
> To: tesla@xxxxxxxxxx
> Subject: Spark gaps
>
> This is Matthew Boddicker.
>
> Over the past year I have seen many different types of spark gaps and I'm
> going to take on a large project that requires a very good spark gap. What
> is the best spark gap? If there isn't a clear winner then what 
> circumstances
> would justify which kind of spark gap?
>
> Thanks everyone!
>
> _________________________________________________________________
> Learn.Laugh.Share. Reallivemoms is right place!
> http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us
>
>
>
>