Re: 555 Timer program (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Sat, 25 Aug 2007 22:40:59 -0500 (GMT-05:00)
From: gary350@xxxxxxxxxxxxx
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: 555 Timer program (fwd)

I found this already it does not show the wave pattern of the 555 timer output.



-----Original Message-----
>From: Tesla list <tesla@xxxxxxxxxx>
>Sent: Aug 25, 2007 2:44 PM
>To: tesla@xxxxxxxxxx
>Subject: Re: 555 Timer program (fwd)
>
>
>---------- Forwarded message ----------
>Date: Sat, 25 Aug 2007 06:49:26 -0800
>From: Jonathan Peakall <jpeakall@xxxxxxxxxxxx>
>To: Tesla list <tesla@xxxxxxxxxx>
>Subject: Re: 555 Timer program (fwd)
>
>How about this: http://ourworld.compuserve.com/homepages/Bill_Bowden/555.htm
>
>Jonathan
>www.madlabs.info
>
>----------------------------------------------------------------------
>Some people are like a Slinky .. not really good for anything,
>but you still can't help but smile when you shove them down the stairs.
>----------------------------------------------------------------------
>----- Original Message ----- 
>From: "Tesla list" <tesla@xxxxxxxxxx>
>To: <tesla@xxxxxxxxxx>
>Sent: Friday, August 24, 2007 2:15 PM
>Subject: 555 Timer program (fwd)
>
>
>> ---------- Forwarded message ----------
>> Date: Fri, 24 Aug 2007 14:26:42 -0500 (GMT-05:00)
>> From: gary350@xxxxxxxxxxxxx
>> To: Tesla list <tesla@xxxxxxxxxx>
>> Subject: 555 Timer program
>>
>> I have an idea for a small Tesla Coil.  I need a 555 timer program does 
>> anyone have one or know here I can download one that really works.
>>
>> I use to have a 555 timer program on my old computer.  I could put in the 
>> values I want and it showed me a graph of the output wave same thing you 
>> could see on a scope.
>>
>> What I am looking for is the resistor, capacitor, diode, values so output 
>> goes high for a very short time, as short as possible.  I want a spike 
>> output not a square wave.
>>
>> I did a search for 555 timer and 555 timer program found several but non 
>> of them actually work.  Several are must advertisements wanting me to buy 
>> software.
>>
>> My TTL book is not showing me what I need to know.
>>
>> Here is the plan.  I am going to connect the secondary coil of a small 
>> modulation transformer in series with the primary coil of the neon.  If I 
>> put a signal on the primary of the modulation transformer is should 
>> modulate the 120 VAC going into the neon.  The output of the neon should 
>> be modulated too.  Turn the dial change the frequency modulation see what 
>> happens.
>>
>> Anyone tried this already?
>>
>>
>> 
>
>
>