Re: [TCML] in need of a pole pig

[resonance@xxxxxxxxxxxx]

Always use a transient filter on the output of a pole xmfr.

Dr. Resonance


> I am in immediate need for a pole pig.  I have a mid/large coil that I was
> running with a 5kva pole pig.  Somehow I managed to blow up my pole pig.
> I
> was trying to run my coil about 3 weeks and I was getting very crazy
> results.  No sparks, except for the spark gap firing (barely).  I have a
> 7.8kva variac and analog volt and current meters.  When I turned the coil
> on
> I noticed the volt meter would jump up! So I tested the pole pig with a
> high
> pot tester and it failed.  I think my filter inductor or my ballast was
> not
> sufficient.    I am looking for a larger pole pig, a 25kva that I can use
> for my existing coil and a larger future coil.  Please note I also tested
> my
> tank capacitors.  I sent them back to manufacture, Condenser products in
> Florida, and they tested them for free.  They found no problems.
>
>
>
> Can anybody help me?  I need my sparks!
>
>
>
> Best regards Jim C.
>
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>


Dr. Resonance

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla