RE: Wire Table

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Aron Koscho" <kc5uto@xxxxxx>

Try:

http://www.essexgroup.com/Products_Services/Magnet_Wire/

-Aron

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Thursday, February 22, 2007 11:07 PM
To: tesla@xxxxxxxxxx
Subject: Re: Wire Table

Original poster: Stan <wsmg@xxxxxxxxxx>

Hey Frank,
            I've found wire tables at sellers pages selling wire on
ebay. I've also found them at some of the wire manufacturers sites.

Tesla list wrote:

>Original poster: Frank <fxrays@xxxxxxxxxx>
>
>Hi Dr. Resonance and Bart,
>
>One of the disadvantages living in a rural area and near small towns
>are no libraries of any size and 50 miles to get there! They do not
>have any handbooks and very little technical references.
>
>I have one 1949 handbook and it has some info but limited.
>
>I will keep looking and when I find some good info, I will let you all
know!
>
>Thanks to all for the help and for the varnished wire table that was
>sent to me!
>
>Frank
>
>At 10:03 PM 2/20/2007 -0700, you wrote:
>
>>Original poster: "Barton B. Anderson" <bartb@xxxxxxxxxxxxxxxx>
>>
>>Hi Frank,
>>
>>I have nothing of that sort, but DC is correct, it can probably be
>>tracked down. We seem not to have an electronic file for a chart of
>>that type. The reason I'm replying here is that if you track down a
>>chart and can get it into some electronic format, there are
>>probably many of us who would also like to get our eyes on it.
>>
>>Take care,
>>Bart
>>
>>Tesla list wrote:
>>
>>>Original poster: "resonance" <resonance@xxxxxxxxxxxx>
>>>
>>>
>>>Your local library.  ARRL Radio Amateur's Handbook.  Charts are
>>>included for EMW in most every book no matter what the
>>>year.  Older issues have the cotton covered wire specs.
>>>
>>>Dr. Resonance
>>>----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
>>>To: <tesla@xxxxxxxxxx>
>>>Sent: Sunday, February 18, 2007 7:03 PM
>>>Subject: Wire Table
>>>
>>>
>>>>Original poster: Frank <fxrays@xxxxxxxxxx>
>>>>
>>>>Hi All,
>>>>Does anyone have a source for wire tables that list the dia's of
>>>>SCC, DCC, bare and enameled wires? They need to give the OD's for
>>>>the wire including the covering or varnish as the OD.s are
>>>>different for the same size wire dependent on the covering.
>>>>I have searched on the web and my books and no luck so far.
>>>
>>>
>>>
>>>
>>>
>>>
>>
>
>
>
>
>