[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: another question

yes that is what im using

On 1/2/07, Tesla list <tesla@xxxxxxxxxx> wrote:

8 kV 330 mA

Dr. Resonance
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Monday, January 01, 2007 10:15 PM
Subject: Re: another question



Original poster: "resonance" <resonance@xxxxxxxxxxxx >

What is the rating on your diodes?
Dr. Resonance
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Monday, January 01, 2007 6:17 PM
Subject: another question

Original poster: Frosty <frosty90@xxxxxxxxx>

Just another quick question,
in a 2 MOT plus doubler setup, is it better to connect the cases of each MOT together and connect the 'center' of the two diodes to the cases, like this (i hope this diagram makes sense!)

        |--------->|----|----->|------|
        |                |             |
      _|_               |           _|_
      _ _               |           _ _
        |                 |             |
      MOT1   GROUND  MOT2
                (MOT cores)
or the leave them unconnected, like this:
       |--------->|--------->|------|
        |                             |
      _|_                          _|_
      _ _                          _ _
        |                              |
      MOT1                 MOT2

i have tried both and either way it works but i keep blowing diodes.......which is the best way to  connect it?
Thanks
Jesse Frost






--
Frosty