[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] TC Newbie



I have a 7.5kV OBIT, brand name; Torridheet.  It seems to have
two separate 7.5kV outputs.  Perhaps it was for a dual burner
system.  The outputs seem to be in parallel such that 15kV
cannot be obtained.

John
---


-----Original Message-----
From: Sfxneon@xxxxxxx
To: tesla@xxxxxxxxxx
Sent: Sat, 6 Dec 2008 9:17 pm
Subject: Re: [TCML] TC Newbie



Most likely, "2 x 7.5 kV" means it is two different transformers in one case. I'm not sure why an OBIT would have two separate transformers, unless it was meant for a dual burner system. I just can't see an oil burner ignition
needing 15 kV.

How many high voltage wires does it have? Have you tried sparking the wires to each other or to the case? If it is two 7.5 kV end grounded transformers in one case, they are probably in phase and couldn't be used for 15 kV, but
might  be paralleled for double the current.

Tony Greer

In a message dated 12/6/2008 5:14:19 P.M. Central  Standard Time,
tonedeafmessiah@xxxxxxxxx writes:
Sorry, I hope I'm not  pestering anyone;

When my transformer says it delivers '2x 7.5Kv, does that mean it will be
pumping 7.5kv, or 15kv through the circuit?

**************Make your life easier with all your friends, email, and
favorite sites in one place.  Try it now.
(http://www.aol.com/?optin=new-dp&icid=aolcom40vanity&ncid=emlcntaolcom00
000010)
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla