Re: [TCML] tcml primary self c

["Chris Swinson" <list@xxxxxxxxxxxxxxxxxxxxxxxxx>]

Maybe this part should brance off to another thread as it sounds like you 
and DC are talking about HV losses which is not what I am doing...

Chris




----- Original Message ----- 
From: "Mike Doyle" <mdoyleufo@xxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Sunday, July 27, 2008 8:19 PM
Subject: [TCML] tcml primary self c


d.c. cox is right . coppor ribbon,for a primary,has sharp edge losses. i use 
,either,varnished copper tubing,or 10gauge thinn ,stranded wire. i tune 
primary,by cutting off,or adding 10 gauge turns. 1 or 2 turns of stranded 
welding cable,on medium sized coils work great.avoid uninsulated 
primaries,please? mike.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.138 / Virus Database: 270.5.6/1576 - Release Date: 27/07/2008 
16:16



_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla