[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] More tc info
But what should I do about the loss in insulation, does it matter?
Cheers,
Reuben
Sent from my Verizon Wireless BlackBerry
-----Original Message-----
From: bartb <bartb@xxxxxxxxxxxxxxxx>
Date: Mon, 17 Mar 2008 18:26:24
To:Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: Re: [TCML] More tc info
Hi Reuben,
That is what I thought. You've got 98 turns for your secondary. Not
really usable. Your top terminal is also too large for such a small
coil. It might be best to rethink the whole secondary and primary coils.
About 1000 turn secondary is what to shoot for (800 up to 1400 is ok).
Shoot for an h/d ratio between 4 and 5. Your current secondary is
7"L/2"D = 3.5 h/d.
But if you want to stay with this small coil size, then pick up
something like 30 awg magnet wire for about 600 turns and rewind (will
require 311 feet of wire). I personally would recommend building a 3"D x
14"L coil using 28 awg magnet wire for 960 turns or something in that
range if you want to keep it small.
Bart
rmferaligator@xxxxxxx wrote:
> I counted about 14 turns every inch
> I hope this helps
> Cheers,
> Reuben
> Sent from my Verizon Wireless BlackBerry
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla