Re: [TCML] Looking for a nive plate transformer

["DC Cox" <resonance@xxxxxxxxxxxx>]

I have a 3 kV 1100 mA plate xmfr.

I also have a 14.4 kV, 10 kVA  pole xmfr.  Sec can be unwound to 4-5 kV
range.  I remove the core/coil assembly and drop them into
a 18 x 18 square x 19" high steel tank with phenolic lid.  You set sec
current with a series power reactor.

In a tank, with oil, it won't even get warm at 800 mA current draw.

Dr. Resonance




On Sat, Oct 4, 2008 at 8:15 PM, David Rieben <drieben@xxxxxxxxxxx> wrote:

> Hi all,
>
> I have been running my VTTC on 2 seriesed ouput MOTs and
> am finding that the MOTs can get smoking hot and start to
> stink during operation. I was wondering if anyone might have
> a plate transformer rated in the 4 to 5 kV @ 600 to 800 mA
> range that they would be willing to sell or trade for? Decent
> plate transformers with voltage and current ratings in this
> neighborhood seem hard to locate on ebay these days.
> Peter Dahl made ones show up some but are quite pricey.
>
> Thanks,
> David
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla