[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] High Power Static Gaps
Sfxneon@xxxxxxx wrote:
Hi All,
I'm curious about the spark lengths achieved by others using a single static
vacuum aspirated gap, (I believe the one designed by Gary Lau if memory
serves)? It uses a vacuum cleaner motor, PVC pipe and two large copper tubing end
caps with holes in the middle for the electrodes.
What are the limiting factors with this type of gap? Can it be scaled up for
higher power? It's a beautifully simple and elegant design, without the need
for any close tolerance machine work like with rotaries, and it's much safer
too.
The literature has references to gaps of this type (generally, not with
the specific construction you describe) running at multiple kilowatt
power levels. The Marx blast gap is a good example. It actually used
air blowing out through the center hole in the electrode.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla