Re: [TCML] JAVATC output

[bartb <bartb@xxxxxxxxxxxxxxxx>]

Hi Robert,

I looked at your coil. Your lead length is 16 and I think you meant 
0.16. Anyway, the coil will need a top load. Have any game plans for 
that? Given the coil is very short and wide with h/d of 2.27, your 
likely to get arcing to the primary with enough power. But power is 
something that is obvious here. It's only a 15/30 NST powering a very 
large coil. The coil portion isn't so much the issue as is the 
capacitance of .04uF. Not a big problem, but it would be nice to know 
your top load as this will affect the results. So, what top load did you 
look at? I notice the coil is out of tune by factor of 4, so I assume 
you modeled a top load and forgot to include it.

Bart

Robert Davies wrote:
> The gap is a guess at this point as I'm not sure yet if I'm going 
> rotary or static.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla