[TCML] still stuck at 36

["Bill Bohn" <b.jbohn@xxxxxxxxxxx>]

I built the hyperbaric gap as described WOW!Now I get 44" I am using a shop
vac for suction.I am using 5 of the 6 strings of caps.I think I did some
damage

To my 5-1/4 coil.Now I have a 6.625" secondary wound 26.5" 1060 turns. Top
load is 4.5x18 toroid and a 7" sphere.Seems best with the primary clamped

At turn 5.The spark sounds somewhat eratic and choppy.IT will smooth out
some by adjusting the spark gap closer at the loss of streamer length .

What is the method of measuring BPS?IT doesn't seem to sound right.The
coupling between primary and secondary is 0.I am going to put the 6 strings
of

My mmc cap in but I think it will be best tuned at about turn 2 and become
even more erratic.

I am getting positive results and thank everyone for all the ideas and 2
cents worth.      

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla