RE: [TCML] High Voltage design questions and considerations

["Jim Mora" <wavetuner@xxxxxxxxx>]

Hi Chuck,

What photos are you referring to? There are lots of Jim's on the list;-^)

I have (2) 14400/5kva transformers. One is a pole pig (presently not used)
The other is my prized PT which is also a 14.4kv/5kva but can do much more
without warming up. Both of course use 240v in. V/control=1256D variac, I
control= saturable reactor with up to 90v dc in to make the core go away.
E=0-280vac I~0-60amps out. The HV is in a separate, dedicated cabinet. 

Jim Mora

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of chuck
Sent: Wednesday, July 01, 2009 7:17 AM
To: 'Tesla Coil Mailing List'
Subject: RE: [TCML] High Voltage design questions and considerations

You have an interesting set of photos, Jim. Question: what kind of HV
transformer did you use for your 12-inch TC?

Asimov13647
Aka chuck

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Jim Mora
Sent: Wednesday, July 01, 2009 1:54 AM
To: 'Tesla Coil Mailing List'
Subject: RE: [TCML] High Voltage design questions and considerations


Hello Mike,
<snip>

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla