Re: [TCML] ARSG Materials continued

[David Dean <deano@xxxxxxxxxxxxxxxx>]

On Friday 10 July 2009 10:22:56 pm Andrew Robinson wrote:
> Ok... thanks for all your replies... but now I have conflicting
> opinions. One says yay Al and another says boo Al. Can you guys show
> some supporting data so I can make the final decision on which material
> to use. FYI in case you didnt look at our engineering diagrams, the Al
> will only be used for the conducting ring and electrode supports. The
> actual electrode electrodes are .25" tungsten. Look at the diagrams and
> note the materials at the bottom of the designs. Thanks, Andrew
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla

Hi

For the conductive ring, I would use copper. On my SRSG with two flying 
electrodes I use a copper strap to connect the electrodes. On the front. Works 
fine.

later
deano
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla