[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] gold secondary

To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: RE: [TCML] gold secondary
From: Tesla <tesla@xxxxxxxxx>
Date: Sun, 19 Jul 2009 15:20:39 +0200
Cc:
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
In-reply-to: <COL101-W3089D8905D6107B6B4B5B7DD1C0@xxxxxxx>
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@www.pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.www.pupman.com>
List-post: <mailto:tesla@www.pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@www.pupman.com?subject=unsubscribe>
References: <COL101-W58DDCAEEB27F8A572BAD18DD1F0@xxxxxxx> <4A61F7D7.8030400@xxxxxxxxxxxxxxxxxxxxxxxx> <COL101-W3089D8905D6107B6B4B5B7DD1C0@xxxxxxx>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx

At 13:02 2009-07-19, you wrote:

i did think of doing as you suggest but its the drying of it thatstumps me and obviosly the space required to stretch it out

If you used UV-lacquer you would have virtuallt zero drying time.Still a lot more work with UV-lamps etc etc.

/Matt

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

References:
- [TCML] gold secondary
  - From: earl rhodes
- Re: [TCML] gold secondary
  - From: Derek
- RE: [TCML] gold secondary
  - From: earl rhodes

Prev by Date: [TCML] Primary # of turns on a 10KVA 14400 pole pig
Next by Date: Re: [TCML] DRSSTC driver board
Previous by thread: RE: [TCML] gold secondary
Next by thread: Re: [TCML] gold secondary
Index(es):
- Date
- Thread