Re: [TCML] Flat Spiral Primary

[jimlux <jimlux@xxxxxxxxxxxxx>]

Mike Thompson wrote:
> Hello All,
>  
>   I have been playing around with some calculations for a flat spiral primary coil, and it turns out that the little bit of .25 inch copper tubing I have is not long enough to for my needs. I was wondering what some of the draw backs of using 9 gauge galvenized fencing wire would be. It is cheaper and I get twice as much wire for half the price of copper.
>  

What about using AWG 10 or AWG 12 bare copper wire?  Galvanized iron 
wire is pretty high resistance.  But you can do the calculations and see.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla