RE: [TCML] Source for 1H air-core inductors

["Dr.Hankenstein" <dr.hankenstein@xxxxxxxxxxxxx>]

Greg,

Your calculations are correct. I suppose if we could saw it in half, it
might fit in the garage. Trouble is, I would have to get a bigger fork
lift. I have a photograph of myself hanging off a 57MVA air core
reactor. Specs are: 34.5kv, about 8 feet tall, six foot diameter,
2250MCM aluminum, 19200 lbs....and it doesn't have a fraction of the
reactance of your 1Hy choke! 

Henry 

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On
Behalf Of Greg Leyh
Sent: Thursday, June 18, 2009 5:40 PM
To: Tesla Coil Mailing List
Subject: [TCML] Source for 1H air-core inductors

Hi All,

I can offer one potential source for 1H air-core inductors; two will 
come free with purchase, as part of the NLL Project.  ;)

Each of the NLL secondary windings will have an inductance just over 1H.
If desired, they can be arranged in series for 2H, total.  The 1H claim 
can be confirmed using Faraday's Law; secondary coilform dimensions are 
29ft dia, 105ft winding length, and 1.8" turn-turn spacing.   GL
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla