http://www.lightninglab.org/Projects/120L50K/120L50K.html The plan is as follows:A) Replace the 3-phase DC resonant charger with a single-phase xfmr using resistive ballasts.
B) Change out the pulse caps in the primary for high-ESR filter caps. C) Add lossy magnetic core material around the primary conductors. D) Decrease the bleed resistor value to 2500ohm, on the 26kV line. E) Increase the rotary gap break rate to 900 BPS.After these changes the power draw should increase to well over 300 kilowatts, making this the most powerful coil in the world. The arc length performance shouldn't be noticably affected.
-GL Jeff Wrote:
The 13M by Bill Wysock made verified 55' arcs - point to point - photographed and measured by 3rd parties.Greg will probably comment soon on the 55-60' claim.The two China coils are fiberglass versions of the 13M and with the vastly improved gap design should exceed 60' each. The coils MAY be run someday (not by us - we are DONE with that client). 150kW eachJeff----- Original Message -----> Did the Chinese ever spin that coil up [for the Olympics] after treated > Jeff so shabbily? > > -- thanks, Dave > > In a message dated 5/14/2009 5:37:35 A.M. Mountain Daylight Time, > resonance@xxxxxxxxxxxx writes: > > The Electrum coil was producing 55 to 60 ft long sparks at 130 kVA. > > I have a large one in Australia, running at 150 kVA, class RSG type, 8 ft > dia x 42 ft tall, produces 78 ft sparks. > > Jeff P.'s large coil I think runs at 200 kVA and produces 120 ft long > sparks > (the China coil). I don't know if they set it up and tested it prior to > shipping or not. > > Dr. Resonance
_______________________________________________ Tesla mailing list Tesla@xxxxxxxxxxxxxx http://www.pupman.com/mailman/listinfo/tesla