Re: [TCML] Terry Filter

["Dan Casaregola" <ag2z@xxxxxxxxxxx>]

I have no idea.  The legend on my drawing shows 12 movs for a 9kv nst,14 
movs for a 12kv ;nst, and 16movs for a 15kv nst.  I can only assume that 
your drawing would provide a greater safety factor.
----- Original Message ----- 
From: "Paul Brodie" <pbbrodie@xxxxxxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Thursday, November 05, 2009 10:01 PM
Subject: Re: [TCML] Terry Filter


> My drawing shows 9 MOV's on each side. Why the discrepancy?
> Paul
> Think Positive
>
> ----- Original Message ----- 
> From: "Dan Casaregola" <ag2z@xxxxxxxxxxx>
> To: <tesla@xxxxxxxxxx>
> Sent: Thursday, November 05, 2009 6:38 PM
> Subject: [TCML] Terry Filter
>
>
> I'm in the process of building a filter for my 15k/30ma NST, and the 
> drawing I have shows the number of MOVs required for the stated voltage, 
> but it only shows 6 MOV. either side of center tap ground.  I remember 
> reading somewhere that the number of caps should be the same as the number 
> ov MOVs.  Is this correct?  Thank you  Dan
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla