Shaun,
I am in the process of negotiating with a guy to purchase (5), 1.2kohm 175
watt resistors. If I can get his high shipping costs down enough to make
it worth buying them, I will be glad to share with you and let you get 2
of them from me. Write me off list and I will keep you posted on how this
goes. If it works out, I will have about $7 in each of them. I would
appreciate input from anyone about how much I am potentially paying for
these. Is $7 too much or about right?
Paul
Think Positive
----- Original Message -----
From: "Shaun Epp" <scepp@xxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Monday, November 09, 2009 12:53 PM
Subject: [TCML] newer tesla coil parts
Here are some pictures of my new NST filter. I ordered parts from digikey
this time and used the correct values and MOVs( before I was using 3Kohm
resistors and door knob caps). It's built so that I can change from 7
MOVs per side to 8. After reading posts on this list, I think I'm going
to use all 8 for my 12Kv, 60mA NST because it puts out more that 12Kv at
120V in and I'm using a variac. I'm using 50 watt resistors for the
1Kohms, I can't get ahold of the 100w versions, does anyone on the list
have some for sale?
http://i487.photobucket.com/albums/rr239/growl99/NSTfilterfront.jpg
http://i487.photobucket.com/albums/rr239/growl99/NSTfilterback.jpg
Question:
My capacitor bank is currently on 2 boards and I'm going to make a 3rd
board of CD 942 caps (14 caps 0.15uf in series spaced). What are other
coilers using for board to board spacers?, I want to stack them one on top
of the other, and legs to keep them off of the floor, right now I'm using
1/4 inch nylon bolts with heat shrink tubing over them to strengthen them.
thanks,
Shaun Epp
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla