[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] Need new cap(s) for my coil

To: <tesla@xxxxxxxxxx>
Subject: [TCML] Need new cap(s) for my coil
From: "Brandon Hendershot" <mrbrandman@xxxxxxx>
Date: Sat, 24 Oct 2009 11:05:39 -0700
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.pupman.com>
List-post: <mailto:tesla@pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx

Hi,
I'm running a 15/30 NST. the recommended capacitor farad rating for that is 0.015uF. I've found this capacitor; 0.015uF 10,000V Film Capacitor (http://www.tedss.com/MPE11H-.015-10000-10/). Could I wire 4 of these in series to get a total voltage rating of 40,000V ( 2.6 times the NST output voltage) and still have a 0.015uF capacitance rating?
Thanks,
Brandon
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- Re: [TCML] Need new cap(s) for my coil
  - From: Quarkster
- Re: [TCML] Need new cap(s) for my coil
  - From: David Speck
- Re: [TCML] Need new cap(s) for my coil
  - From: David Dean

Prev by Date: Re: [TCML] capacitor charge time?
Next by Date: [TCML] A few modifications on GU5B vttc
Previous by thread: Re: [TCML] capacitor charge time?
Next by thread: Re: [TCML] Need new cap(s) for my coil
Index(es):
- Date
- Thread