I have already tested them in DRSSTC service. They work excellent. We
checked thermal rise with an infrared camera. No problems after
continuous
10 minute runs.
They are comprised of series sections and parallel sections to spread out
the thermal load over a large area.
Dr. Resonance
On Thu, Sep 17, 2009 at 4:25 PM, Dave Leddon <dave@xxxxxxxxxx> wrote:
Dr. Resonance,
If you would be willing to provide to me, free of charge, a sample of
each
one of these capacitors, I would be willing to verify their applicability
to
DRSSTC service. Failing that, I would be willing to join a group buy,
should some generous soul be willing to set it up (i.e., somebody other
than
me).
Dave
At 09:32 AM 9/17/2009, you wrote:
I carry high-Q factor heavy duty pulse caps for medium and large size
DRSSTCs.
SSCAP-200 measures 3 3/4" x 5" x 11" and is very conservatively rated
0.8
uF
(800 nF) at 20 kV WVDC.
SSCAP-400 measured 3 3/4" x 5" x 11" and is conservatively rated 1 uF at
20
kV WVDC.
Designed for continuous operation at 12 kV DC in H-bridge configuration.
Contact me off-list for further information. If someone assembles a
"group
buy" I can provide pricing around $390 per cap.
Dr. Resonance
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla