[TCML] Ok now heres everything with finshed sencondary coil...all wired to go.

[Julius Crummer <juliustc81@xxxxxxxxx>]

Heres the completed coil with secondary wounded. Only thing stopping me from 
plugging it in is the variac which im waiting for. Some quick specs: NST: 
6KV/60ma, 8 turns of primary 1/4" tubing for outer dia of 17", secondary i used 
a 1,000 ft roll about 900-1000 turns 28awg, its 22" tall 3.5" diameter all the 
red wires are 14awg, 6 Cornell Dubilier .015uF 2KV capacitors, a topload of a 
dryer venting 14.5" outer diameter, 2' X 2' aluminum sheet for counterpoise 
under, 7 tubes of copper with A/C powered fan for static gap, and three bolts 
for a safety gap. Well thats it in a nutshell and whatever u see in the pic. 
Thanks for all you guys help and advice :)

http://www.flickr.com/photos/39213193@N03/4875212284/



      
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla