[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Questions about saturable reactor / magnetic amplifier
Usually a gapped core non-saturable reactor is required. Cores without gaps
just don't seem to perform very well as the pole xmfr hits peaks the core
saturates and allows peak currents 10 to 50 times the average current.
We use laser cut C-Cores and usually set each gap around 60-80 mils
depending on total current limiting required.
Dr. Resonance
On Wed, Aug 18, 2010 at 12:07 PM, Teslalabor <teslalabor@xxxxxxxxxxx> wrote:
> Hello,
> after several months searching for a suitable transformer for modification
> into a saturable reactor, I now have found a big 3-phase welding
> transformer, which was in use on 3-phase 400V here in Germany.
> For my big teslacoil, which runs on 2-phase 400V, I want to modificate this
> transformer into a magnetic amplifier. The goal is, to control the current
> through the outer legs of the transformer @ 400V from 0-60 Amperes whith a
> DC current of 20A on the middle leg of the transformer.
> Today I removed the heavy welding windings, and put the two outer legs of
> the transformer in series and connected them on 400V. On the middle core leg
> of the transformer, I wound a winding of several turns and applied 20
> Amperes DC to it. I measured the 400V - current trough the outer windings,
> and it arrised from 0,5A to 10A, when I regulated the DC from 0 - 20A.
>
> There was something strange to me: The current in the 400V windings firstly
> raised very fast when I raised the DC and then only very smoothly.
>
> I then doubled the windings on the DC winding. I got the 10A in the 400V
> windings at only 10A (instead of 20A before) but it only increased to 12A
> when I pulled the DC to 20A. In the same way: firstly very rapid current
> rising, than only 2A from 10A to 20A DC. Why this? How many thousend turns
> do I need for reaching 60Amps in the outer 400V windings? Is it even
> possible?
>
> Best Regards
> Stefan
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla