RE: [TCML] Wire recommendation for new secondary

["Craig" <cdumey@xxxxxxxxxxx>]

Thanks to everyone for the info. I have decided to use 26 awg on my new 6" x
30" secondary. This should give me around 1500 turns.

Craig

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Lau, Gary
Sent: Wednesday, February 24, 2010 3:17 PM
To: Tesla Coil Mailing List
Subject: RE: [TCML] Wire recommendation for new secondary

My coil uses a 15/60 NST, Sync RSG, and .04uF cap.  I use a 6.25" x 26"
28AWG secondary.  This high inductance forces me to also use a large topload
and primary inductance, which is a GOOD thing, efficiency-wise.

Regards, Gary Lau
MA, USA

> -----Original Message-----
> From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On
> Behalf Of Craig
> Sent: Tuesday, February 23, 2010 7:16 PM
> To: tesla@xxxxxxxxxx
> Subject: [TCML] Wire recommendation for new secondary
> 
> Hi all,
> 
> 
> 
> I am winding a new 6" x 30" secondary coil. What awg wire size would be
> preferred for this size coil? I have a 16K/65ma transformer which can
handle
> more than its rated load for short periods.
> 
> 
> 
> Thanks,
> 
> 
> 
> Craig

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla