Re: [TCML] RSG that didn't get built

[johnbrooks@xxxxxxxxxxx]

Yes there is a plate semi-mounted to the center of the two foot dia
G10-FR4,
I have a Powerstat 1296D,,I might as well let slide to a useful
purpose.Look
it up,,its a Hoss.
Thank You to Moderators,,
remember,please,reply to ,,joesmith-at-cvctx-dot-com
Joe.

On Thu, 14 Oct 2010 17:19 -0700, johnbrooks@xxxxxxxxxxx wrote:
> I have one and one half inch tungsten by half inch diameter,,,,,also
> G10,FR4,,cut from
> one half by 24 inch,,,,previous smaller builds had guaranteed me a tight
> fit if I used curved on top electrode.I went for the same curve as the
> dome on the building on a U.S.Nickel,,5 cents,,by using a suitable
> socket (from toolbox) to cover the tungsten I pushed it in place with a
> 5-Ton jack,beneath my Wife's,Kia Sedona,,I bought the drill that was one
> 64th below
> one half inch.This proved to be totally impossible to align
> electrodes,,the hole was just too tight.
> 
> I state this as there are many proven OTHER ways to install electrodes
> in G10.
> I see David,,with the Green Monster,,runs a flat surface electrode.Taste
> vary.
> It's all in the archives.
> 
> Anyway,,,I have this tungsten just laying here,,and I would have to get
> up and
> go dig out the big bright blue circular disk as I,,don't remember if I
> drilled a 
> hole in the center,,,I beleive I did.When I cut it on my bandsaw,,,I
> wandered off
> the line at one or two places.The outside of the line,,,not the inside.
> It was a 
> long tough cut. If anyone needs it I will take half or less, of what I
> had to pay for it.
> Joe in Texas
> addm:I see there are 4,,,1/2, by,,one inch I had bought for stationary
> electrodes.
> the address I use,,,johnbrooks-at-airpost is an account I use for TCML
> ONLY,,,I have not been spammed a single time.Send Personal e-mail to
> joesmith-at-cvctx.com
> -- 
>   
>   johnbrooks@xxxxxxxxxxx
> 
> -- 
> http://www.fastmail.fm - Does exactly what it says on the tin
> 
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
> 
-- 
  
  johnbrooks@xxxxxxxxxxx

-- 
http://www.fastmail.fm - A fast, anti-spam email service.

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla