[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re:Re [TCML] SCR tesla coil
From: "bturner@xxxxxxxx" <bturner@xxxxxxxx>
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sent: Tuesday, 22 November 2011 1:50 PM
Subject: Re: [TCML] SCR tesla coil
Has a lot to do with the trigger (gate) capacitance I would figure. Other
point is that an SCR only conducts in one direction, thus defeating the
whole idea of a spark gap. Perhaps in some sort of a PWM DC style,
changing the duty cycle of the current pulse into the primary tank
circuit...
What about an SCR connected across the output terminals of a bridge rectifier of suitably fast-switching rectifier diodes of the type used for switch-mode power supplies? That way the SCR will see no reverse voltage, the bridge will have sorted that out. Would that work -or would the combined capacitance of the SCR plus diodes present even more of a problem?
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla