Hey all,
Out of curiosity what cores are you guys using for your chokes, the
original post mentioned using a large old variac core but you should
really not need one that big.
Thanks,
John "Jay" Howson IV
"Why thank you, I will be happy to take those electrons off your hands."
----- Original Message -----
From: "Jon Danniken" <danniken@xxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Sunday, December 9, 2012 12:24:43 PM
Subject: Re: [TCML] more on paralleling
On 12/08/2012 05:58 PM, Jim Lux wrote:
On 12/8/12 4:18 PM, Steve Ward wrote:
Scott,
My understanding of balancing transformers suggests that you really do
need 1 core per device being balanced.
I think N-1.. for two devices, 1 core, etc.
This is how I configured the chockes for my three variac stack, by using
two cores. Most diagrams show, as Steve mentioned, one choke per
variac, but I was fortunate to find a diagram which demonstrated the
method that I used.
For reference, this method is described in diagram "A" in the following
image:
http://i.imgur.com/evRdd.gif
Jon
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla