[TCML] microbrute DRSSTC

[w5als <w5als@xxxxxxxxx>]

Hi
     I am building a microbrute drsstc by eastern voltage research and 
i am have problems
and need some help. I finish it yesterday and was trying to fire it off 
and got nothing so by
the book i reverse the polarity through the current transformer that 
didn't work.
All the voltages are right check them 3 times the LED's light up, the 
over current led come
on when I ramp the PW control up. I took the board out check all solder 
joints and check
ever IC twice to make sure it was right. I tested ever diode and they 
were good, ever cap.
was check twice, I ever check the controller and wave from twice, i even 
compare the wave form
to another controller i have. I even ohm the primary and secondary out 
they were good.
Unless the IGBT are open i don't know what else it could be. Also no 
blown fuses neither.
I am not the best at this but i did have a radio/TV repair shot for 27 
years so this isn't new
to me. I can send detail pictures if someone can compare to there's. I 
will thank anyone
for the help
thanks
alton
W5ALS
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla