[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] cone winding , again

To: <tesla@xxxxxxxxxx>
Subject: [TCML] cone winding , again
From: david baehr <dfb25@xxxxxxxxxxx>
Date: Mon, 31 Dec 2012 14:40:39 -0700
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Importance: Normal
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.pupman.com>
List-post: <mailto:tesla@pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx




After digging deeper , I see poly may dissolve the tape adhesive ? , 		 	   		  _______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Prev by Date: [TCML] conical sec winding tips
Next by Date: Re: [TCML] microbrute DRSSTC
Previous by thread: Re: [TCML] conical sec winding tips
Index(es):
- Date
- Thread