Re: [TCML] ANOTHER ONE DOWN, ANOTHER 37667 BITES THE DUST

[jhowson4@xxxxxxxxxxx]

Oh right, my mistake, i just transposed the info wrong. 
Alright so a very long time between runs. good to know. 
At least this means that my coil is doable. good news! maybe I wont have to redesign the secondary after all. 



Thanks, 
John "Jay" Howson IV 


"Why thank you, I will be happy to take those electrons off your hands." 

----- Original Message -----
From: "Tesla" <tesla@xxxxxxxxxxxxxxx> 
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx> 
Sent: Monday, May 14, 2012 12:37:43 AM 
Subject: Re: [TCML] ANOTHER ONE DOWN, ANOTHER 37667 BITES THE DUST 

HI 
was 4 strings operating breaks are quite long (several 10's of minutes) 
Ted 

-----Original Message----- 
From: jhowson4@xxxxxxxxxxx 
Sent: Monday, May 14, 2012 3:35 PM 
To: Tesla Coil Mailing List 
Subject: Re: [TCML] ANOTHER ONE DOWN, ANOTHER 37667 BITES THE DUST 

Ohhh now that is convenient!! 
My system will be pretty much the same when it is done, DC, 24kv pk, but 
only 6kva not 10, and at 90Khz too. 
So your using 3 strings of 15 .33uf 1600v does the trick you say for less 
than 2 min runs. 
How long between runs to you leave the coil to cool down? 




Thanks, 
John "Jay" Howson IV 


"Why thank you, I will be happy to take those electrons off your hands." 

----- Original Message ----- 
From: "Tesla" <tesla@xxxxxxxxxxxxxxx> 
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx> 
Sent: Sunday, May 13, 2012 11:18:09 PM 
Subject: Re: [TCML] ANOTHER ONE DOWN, ANOTHER 37667 BITES THE DUST 

Hi 

Nice to see Robin is still on the list too, 

My case is 300 bps (actually sync with mains but not important with DC 
supply) DC operation from 6 MOT secondary's in series (in oil) with 
resonant charging (10Hy from 4 gapped MOT secondary's 2 // then 2 of that in 
series) giving about 24 kv peak (never actually measured it) but I do have a 
Pete Terren inspired DC or AC Voltmeter (a digital one and an analogue one 
actually) capable of measuring up to those voltages, if the weather ever 
permits I'll check to see if I'm getting the theoretical value. 

Just love the control and smoothness of DC operation 

Ted in NZ 

-----Original Message----- 
From: jhowson4@xxxxxxxxxxx 
Sent: Monday, May 14, 2012 12:40 PM 
To: Tesla Coil Mailing List 
Subject: Re: [TCML] ANOTHER ONE DOWN, ANOTHER 37667 BITES THE DUST 

hmmm, these caps might be useful to me. 
Just out of curiosity , what bps and voltage are you running at? 

When I do my calculations, my biggest problem is the RMS current being too 
high requiring large series numbers to make up for it. But i have been 
collecting data on peoples coils to see how far they are pushing the limits 
on the various CDE caps. 

<SNIP> 

_______________________________________________ 
Tesla mailing list 
Tesla@xxxxxxxxxx 
http://www.pupman.com/mailman/listinfo/tesla 
_______________________________________________ 
Tesla mailing list 
Tesla@xxxxxxxxxx 
http://www.pupman.com/mailman/listinfo/tesla 

_______________________________________________ 
Tesla mailing list 
Tesla@xxxxxxxxxx 
http://www.pupman.com/mailman/listinfo/tesla 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla