Re: [TCML] Cleaning Copper Primary Coil (with Muriatic/HydrochloricAcid)

[<pterren@xxxxxxxxxxxx>]

I seem to recall that I do not get good results with using a power drill 
with a steel wire brush on copper.
I suspect there is some Redox chemistry involved which prevents a nice shiny 
result.
Anyone had the same experience?
Peter
www.tesladownunder.com

-----Original Message----- 
From: Brandon Hendershot

... polishing 70 feet of copper with a piece of
steel wool isn't going to cut it for me, ....

How would/have you cleaned your coils? With or without acid, If it
beats the steel wool and elbow grease, I'm all for it.

Thanks for any help,
Brandon H.

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla