[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] cone coil tuning

To: <tesla@xxxxxxxxxx>
Subject: [TCML] cone coil tuning
From: david baehr <dfb25@xxxxxxxxxxx>
Date: Sun, 6 Jan 2013 14:44:10 -0700
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Importance: Normal
List-archive: <http://www.pupman.com/pipermail/tesla>
List-help: <mailto:tesla-request@pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.pupman.com>
List-post: <mailto:tesla@pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=unsubscribe>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: tesla-bounces@xxxxxxxxxx




Hello,          Still a long way off from firing the conical . Right now, its turning at 12 RPM  with its finish coat of poly.            I was looking through the archives and it was mentioned that a conical coil does not tune like a cylinder coil.              So, is this fact or fiction , and if its a fact, what do i need to do differnt ?                                                                   Thanks ! ,daveB                		 	   		  _______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Follow-Ups:
- Re: [TCML] cone coil tuning
  - From: David Thomson

Prev by Date: [TCML] SCRTC?
Next by Date: Re: [TCML] cone coil tuning
Previous by thread: Re: [TCML] NST Questions
Next by thread: Re: [TCML] cone coil tuning
Index(es):
- Date
- Thread