User-agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:52.0) Gecko/20100101 Thunderbird/52.5.0
Hello Everyone - I'm building my first VTTC and am wondering about
primary tuning freq vs secondary freq. I've built many spark gap coils
both static and sync and in those I would add a piece of wire the length
of the spark to the top load and tune both pri and sec to the same
frequency with my o' scope and signal generator and it has worked very
well. However I've read VTTC's the primary circuit should be tuned much
lower then the secondary. Question is how much lower and can I pre tune
it with my o' scope and sig. gen like on my spark gap coils but with a
de-tune factor?
This coil is based on a single 810 triode, medium sized MOT , 1.0
nano/10kv mica transmitter cap and 3.5x 11.5 secondary,