Jay is correct. Additionally, you'd be hard pressed to find a single
resistor with the necessary 100Meg+ resistance and 25KV+ voltage rating.
On Sun, Dec 6, 2020 at 2:07 PM jhowson4 <jhowson4@xxxxxxxxxxx> wrote:
> Unfortunately not, The issue is each cap effectively has a DC blocking cap
> in series with it. So you won't dissipate any charge build up on the
> individual caps.-JaySent from my Verizon, Samsung Galaxy smartphone
> -------- Original message --------From: Adam James <
> adamjamesarmy60@xxxxxxxxx> Date: 12/6/20 1:32 PM (GMT-05:00) To: "
> tesla@xxxxxxxxxxxxxxxxxx" <tesla@xxxxxxxxxx> Subject: [TCML] MMC Safety
> resistors A question on bleeders, I understand the best method is to use a
> bleeder oneach Capacitor. On The MMC I am building it will difficult, not
> impossible,to do this. Can I use one resistor strategically placed to
> accomplish this,if so where would be best place to put it?It is not a very
> large MMC [20kv/5nf].Adam
> J._______________________________________________Tesla mailing listTesla
> @tedward.pupman.comhttps://www.pupman.com/mailman/listinfo/tesla
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla