[Prev][Next][Index][Thread]
Re: Arc Impedance Study - Computer Models
Terry -
The analysis of your Tesla coil using Spice is very interesting. The
analysis for finding the optimum TC coupling, inductance and frequency is a
novel approach to this type of problem. This solution certainly simplifies
finding these parameters, however, it could be misleading. How is the Peak
Current and Burst Time determined?
I have a PSpice program but never did much with it. You have given me
renewed interest in applying it for the solution of TC problems. How did
you set up the input file for your analysis (Probe)?
John Couture
-----------------------------------
At 05:01 PM 10/10/98 -0600, you wrote:
>Original Poster: Terry Fritz <terryf-at-verinet-dot-com>
>
>Hi All,
>
> I ran a bunch of Spice models today using an arc load of 220k ohms and
>5pF. This is the estimated arc load value I found from measurements on my
>coil. I tested the ability of the coil to deliver power to the 220k
>resistor while I varied the coupling, Lp, the ratio of Ls and Ct, and Fo.
>
>The numbers my computer model used are as follows:
>
>Primary Capacitor Voltage 20000
>Primary Capacitance 17.05uF (nf)
--------------------- big snip
> Terry Fritz