Re: 5021g10 transformer (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Fri, 17 Aug 2007 13:46:40 -0500
From: Drake Schutt <drake89@xxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: 5021g10 transformer (fwd)

6kv is plenty of voltage for a SG coil and the more power (current) the
merrier.  Just be VERY careful and don't get bit.  At the power levels your
a working with, any mistake could be your last.

good luck and big sparks
drake schutt

On 8/17/07, Tesla list <tesla@xxxxxxxxxx> wrote:
>
>
> ---------- Forwarded message ----------
> Date: Fri, 17 Aug 2007 11:40:41 -0500
> From: Terri Neeley <neeley_111@xxxxxxx>
> To: tesla@xxxxxxxxxx
> Subject: 5021g10 transformer
>
> Well I got my transformers today 2 of them from c and h.  1 of them was
> damaged and I attempted repair and I thought I had it fixed until I wired
> it up.  It just buzzed and only output 800v so I'm down to 1.  It puts
> out 6.3kV @ 400mA tested with a variac fluke 179 and a fluke 80k40.  Is
> this enough voltage for a tesla coil?  Is it too much current?  Any
> advice would help.  Thx in advance.
> Garry Neeley
>
>
> ________________________________________________________________________________
>
> More photos, more messages, more storage—get 2GB with Windows Live
> Hotmail.
>
>
>