Re: [TCML] Strike Rail Hits Was: Stacking vs Large Diameter

[Finn Hammer <f-h@xxxx>]

bartb skrev:
> I've gone through some pics of ribbon primary construction, and of all 
> I've seen, a simple standoff like what Bill used seems to be the best 
> solution in my book.
Or- in the case that you would like to have uncluttered access to the 
coil from the bottom, which makes it so much easier to move the move the 
tapping point- and provides the added bonus of enabling the tap wire to 
go into the center of the coil. (The benefit of this is, that when you 
move the tapping point, it is only in the coil that the inductance 
changes)  Look here for standoff details:
http://home5.inet.tele.dk/f-hammer/tesla/ambassador/primary/primary.htm

This method was also used on the Museum coil seen here:
http://home5.inet.tele.dk/f-hammer/tesla/tesla.htm

Cheers, Finn Hammer

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla