bartb skrev:
I've gone through some pics of ribbon primary construction, and of
all I've seen, a simple standoff like what Bill used seems to be the
best solution in my book.
Or- in the case that you would like to have uncluttered access to the
coil from the bottom, which makes it so much easier to move the move
the tapping point- and provides the added bonus of enabling the tap
wire to go into the center of the coil. (The benefit of this is, that
when you move the tapping point, it is only in the coil that the
inductance changes) Look here for standoff details:
http://home5.inet.tele.dk/f-hammer/tesla/ambassador/primary/primary.htm
This method was also used on the Museum coil seen here:
http://home5.inet.tele.dk/f-hammer/tesla/tesla.htm
Cheers, Finn Hammer
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla