[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [TCML] Connecting the primary
-----Original Message-----
>From: Jeremy Scott <supertux1@xxxxxxxxx>
>Sent: Jul 28, 2008 11:02 AM
>To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
>Subject: RE: [TCML] Connecting the primary
>
>Yeah I've been scratching my head trying to find something that won't short adjacent coils, will support the weight of the 1/0 wire
>and will be easy to adjust.
1/0? Just how big is that coil and how much current are you running through the primary? Are you afraid it will melt<grin>?
Why not use something like AWG14 stranded... It's not like a few inches of wire is going add all that much loss, compared to the losses you already have in the spark gap.
If you want a "big impressive" looking cable, put foam insulation on it.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla