Re: [TCML] Re: Position of baffle inside secondary

[DC Cox <resonance@xxxxxxxxxxxx>]

I have always used two 1/4" acrylic baffles in all my coils.  One usually
3-4 inches up from bottom and second approx 5 inches down from HV end.
Use generous amount of silicon to affix.

Dr. Resonance

On Sat, Jul 11, 2009 at 1:07 PM, Peter Terren <pterren@xxxxxxxxxxxx> wrote:

> I need to position a single baffle inside a TC. My guess is that voltage
> stresses are greatest the base as that is where racing arcs are, so a baffle
> near the base would be best.
> Any comments? Hey even a noob has a 50% chance of being right here.
> I think when tuned that voltage is lowest and current highest near the
> base, but in a racing arc situation things may break down more at the base
>
>
>
> Peter
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla