From: pbbrodie@xxxxxxxxxxxxx
To: tesla@xxxxxxxxxx
Subject: Re: [TCML] newer tesla coil parts
Date: Thu, 12 Nov 2009 14:10:07 -0500
Reply to self.
I went back and looked again at Digi-Key and found that the price for 10
of the 1.0kohm 100 watt resistors is $6.50 plus approximately $9.50 to
ship via UPS ground. they won't give an exact amount for shipping, until
they actually ship them. I wasn't going to buy them just to find out how
much shipping costs. :-o
So, I sent the guy with the 175 watt 1.2kohm resistors an email and gave
him the information about the Digi-Key resistors. I asked him if he will
sell me 10 of them and ship them with USPS Flat Rate Priority Mail, large
box, which only costs $13.35 and that I would pay $20 for shipping to give
him extra to pay for his packaging supplies. This is absurdly generous but
you should read what he writes about how much it costs to ship these.
Anyway, he is asking $4.99 a piece for these resistors and he quotes
$13.57 to ship one and $16.15 to ship 2 and a whopping $40.61 to ship 10
of them! :-p
If he will accept the offer, I will have $70 in 10 of them. I will let
anyone who wants any of them have them for the $7 plus whatever it
actually costs me to ship them to you. Keep in mind that these are large,
10" long and 1" in diameter and they are the type that look like buss
fuses. They have metal caps on the ends that snap into a clamp. You will
most likely have to make a clamp like those that class tube type fuses
(AGC fuses) snap into.
If any of you are interested in these, including those of you who wrote
before, please let me know and if enough people are interested, I will go
ahead and get them, if he agrees with my offer.
Paul
Think Positive
----- Original Message -----
From: Paul Brodie
To: Tesla Coil Mailing List
Sent: Wednesday, November 11, 2009 19:38
Subject: Re: [TCML] newer tesla coil parts
I just went back and looked again and Digi-Key has part number HLC-1.0K-ND
available for $7.15 a piece in a minimum quantity of one. So, $7 just
isn't worth the trouble for used resistors that are the type that mount in
clamps at the ends. They are also 10" long and 1" in diameter. The guy
keeps claiming that it is really expensive to ship them, which is bunk. He
wants over $20 to ship them, claiming they have to have all sorts of
protection to keep them from breaking during shipment.
I ship stuff almost every day and I make sure nothing is ever broken in
transit. These just do not require the type of packaging he is talking
about. Anyway, unless the shipping comes down significantly, I will just
buy mine from Digi-Key. Thanks to everyone who was interested.
Paul
Think Positive
----- Original Message -----
From: Dan Casaregola
To: Tesla Coil Mailing List
Sent: Wednesday, November 11, 2009 18:37
Subject: Re: [TCML] newer tesla coil parts
Digikey is currently getting $10.87 each, so I guess $7.00 is pretty good.
I need two also, so count me in.
----- Original Message -----
From: "Paul Brodie" <pbbrodie@xxxxxxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Monday, November 09, 2009 1:16 PM
Subject: Re: [TCML] newer tesla coil parts
> Shaun,
> I am in the process of negotiating with a guy to purchase (5), 1.2kohm
> 175
> watt resistors. If I can get his high shipping costs down enough to make
> it worth buying them, I will be glad to share with you and let you get 2
> of them from me. Write me off list and I will keep you posted on how
> this
> goes. If it works out, I will have about $7 in each of them. I would
> appreciate input from anyone about how much I am potentially paying for
> these. Is $7 too much or about right?
> Paul
> Think Positive
>
> ----- Original Message -----
> From: "Shaun Epp" <scepp@xxxxxxx>
> To: <tesla@xxxxxxxxxx>
> Sent: Monday, November 09, 2009 12:53 PM
> Subject: [TCML] newer tesla coil parts
>
>
> Here are some pictures of my new NST filter. I ordered parts from
> digikey
> this time and used the correct values and MOVs( before I was using 3Kohm
> resistors and door knob caps). It's built so that I can change from 7
> MOVs per side to 8. After reading posts on this list, I think I'm going
> to use all 8 for my 12Kv, 60mA NST because it puts out more that 12Kv at
> 120V in and I'm using a variac. I'm using 50 watt resistors for the
> 1Kohms, I can't get ahold of the 100w versions, does anyone on the list
> have some for sale?
>
> http://i487.photobucket.com/albums/rr239/growl99/NSTfilterfront.jpg
>
> http://i487.photobucket.com/albums/rr239/growl99/NSTfilterback.jpg
>
>
> Question:
> My capacitor bank is currently on 2 boards and I'm going to make a 3rd
> board of CD 942 caps (14 caps 0.15uf in series spaced). What are other
> coilers using for board to board spacers?, I want to stack them one on
> top
> of the other, and legs to keep them off of the floor, right now I'm
> using
> 1/4 inch nylon bolts with heat shrink tubing over them to strengthen
> them.
>
> thanks,
>
> Shaun Epp
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla