Re: [TCML] Looking for MMC Capacitors

[DC Cox <resonance@xxxxxxxxxxxx>]

I carry them in stock.  What size xmfr asre you using/  That determines cap
size.

Dr. Resonance




On Thu, Aug 5, 2010 at 12:23 AM, Ray Whiteside <rs.whiteside@xxxxxxxxxxx>wrote:

> I have had a hellacious time finding appropriate caps to buy for my MMC.
> The
> tank capacitor needs to be close to 10nF and be able to withstand around
> 16kV, so I've been looking for 1-2 kV caps and capacitance values to keep
> the number of strings somewhat reasonable. Polypropylene caps with
> charge/discharge rates over 1000 V/microsecond and all the other above
> requirements have been very difficult for me to track down online, and when
> I finally do the minimum order is something like 150 pieces.
>
> Essentially I'm sorry for the really noob/seemingly google-able question
> here, but could someone point me to a good source for small coil caps
> and/or
> another solution? I have already bought one set from a sub-par site, and
> the
> lack of complete spec sheet on the site led me to end up buying caps with
> the same part number as what I wanted, but another version with 1/5th the
> capacitance value. I am trying to see if I can use some good will from here
> to avoid another such mistake. :)
>
> Thanks
> --
> Raymond Whiteside
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla