[TCML] Bleeding resistors for MMC

[John Byström <zrc@xxxxxxx>]

I know this question has been brought up before, but they 
were a bit old posts and I don't know if there is anything new 
in the "Tesla world" and opinions and rules maybe have 
changed.

For my 8kV 50mA NST I'm gonna have a 37,5nF MMC bank,
with 0.1uF capacitors. If I've made the calculations right from 
the formulas I found, I need a resistor with the value 20Mohm
and handle 3,2W. How important is this?

Because I probably gonna order both the capacitors and 
resistors from Elfa, and they don't have any over 1/2W. Does 
that mean I need around 6-7 resistors over each capacitor?
 		 	   		  
_________________________________________________________________

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla