If you are looking for an easy solution to ballast one of the common
14.4kV GE potential transformers, look below.
Terry Blake came up with the great idea of using a 500ft spool of 12AWG
stranded wire from Home Depot as the ballast. When wired in series with
the 115VAC input to the potential transformer, it limited current to about
240mA output at 14.4kV. What a great solution!
You could probably also scale this for use with other transformers
accordingly.
Of course, for a pole transformer, the best ballasting solution is a
Lincoln Arc-Welder which can be had for very inexpensively on craigs list.
Dan
http://www.easternvoltageresearch.com
LED Sequencer Kit Available - VTTC Stacatto Controller COMING SOON!
-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Andreas
Sent: Monday, October 25, 2010 5:19 PM
To: Tesla Coil Mailing List
Subject: EXTERNAL: Re: [TCML] Can i use an NST as ballast ?
Ok, the power output from my potential transformer will never be more than
the ballasting NST. So if my NST is rated 500VA i will get 500VA or less
from my potential transformer. But if i add two 500VA NST:s in parallel i
get 1000VA or less.
Guess its time to find some MOT:s.
Thansk for the help guys.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla