[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Primary/Sec. Frequency
Tim,
You didn't put in a primary cap value... Also no top load
information... In general add as much info as possible when using Java TC,
and if you are tremendously lazy and just want to tweak one setting for
research purposes (as I often do) load the demo coil first, so at least all
the important fields are filled in.
Scott Bogard.
On Wed, Jun 19, 2013 at 11:26 AM, Tim Flood <tflood@xxxxxxxxxxx> wrote:
> Phil,
>
> After double checking everything, below is my most recent JavaTC output
> file. These numbers are based on a 6.0" diameter secondary. This is the
> worst scenario yet, with a Primary Resonant Frequency of 0 KHz. What in the
> world did I do now?
>
> I look forward to you comments.
>
> Thanks,
>
> Tim
>
> J A V A T C version 12.2 - CONSOLIDATED OUTPUT
> Wednesday, June 19, 2013 11:19:56 AM
>
> Units = Inches
> Ambient Temp = 68°F
>
> ------------------------------**----------------------
> Surrounding Inputs:
> ------------------------------**----------------------
> 25 = Ground Plane Radius
> 25 = Wall Radius
> 16 = Ceiling Height
>
> ------------------------------**----------------------
> Secondary Coil Inputs:
> ------------------------------**----------------------
> Current Profile = G.PROFILE_BARE
> 3 = Radius 1
> 3 = Radius 2
> 24 = Height 1
> 56.4 = Height 2
> 1200 = Turns
> 22 = Wire Awg
>
> ------------------------------**----------------------
> Primary Coil Inputs:
> ------------------------------**----------------------
> 4.5 = Radius 1
> 15.4 = Radius 2
> 23.5 = Height 1
> 23.5 = Height 2
> 17 = Turns
> 0.25 = Wire Diameter
> 0 = Primary Cap (uF)
> 20 = Total Lead Length
> 0.25 = Lead Diameter
>
> ------------------------------**----------------------
> Top Load Inputs:
> ------------------------------**----------------------
>
> ------------------------------**----------------------
> Secondary Outputs:
> ------------------------------**----------------------
> 242.48 kHz = Secondary Resonant Frequency
> 90 deg° = Angle of Secondary
> 32.4 inch = Length of Winding
> 37 inch = Turns Per Unit
> 0.00165 inch = Space Between Turns (edge to edge)
> 1885 ft = Length of Wire
> 5.4:1 = H/D Aspect Ratio
> 30.1807 Ohms = DC Resistance
> 43387 Ohms = Reactance at Resonance
> 3.67 lbs = Weight of Wire
> 28.478 mH = Les-Effective Series Inductance
> 34.24 mH = Lee-Equivalent Energy Inductance
> 37.379 mH = Ldc-Low Frequency Inductance
> 15.128 pF = Ces-Effective Shunt Capacitance
> 12.582 pF = Cee-Equivalent Energy Capacitance
> 31.752 pF = Cdc-Low Frequency Capacitance
> 5.79 mils = Skin Depth
> 0 pF = Topload Effective Capacitance
> 165.0037 Ohms = Effective AC Resistance
> 263 = Q
>
> ------------------------------**----------------------
> Primary Outputs:
> ------------------------------**----------------------
> 0 kHz = Primary Resonant Frequency
> 100 % high = Percent Detuned
> 0 deg° = Angle of Primary
> 88.57 ft = Length of Wire
> 14.7 mOhms = DC Resistance
> 0.391 inch = Average spacing between turns (edge to edge)
> 1.443 inch = Proximity between coils
> 0 inch = Recommended minimum proximity between coils
> 142.224 µH = Ldc-Low Frequency Inductance
> 0.00302 µF = Cap size needed with Primary L (reference)
> 0.51 µH = Lead Length Inductance
> 251.842 µH = Lm-Mutual Inductance
> 0.109 k = Coupling Coefficient
> 0.135 k = Recommended Coupling Coefficient
> 0 = Number of half cycles for energy transfer at K
> 0 µs = Time for total energy transfer (ideal quench time)
>
> ------------------------------**----------------------
> Transformer Inputs:
> ------------------------------**----------------------
> 0 [volts] = Transformer Rated Input Voltage
> 0 [volts] = Transformer Rated Output Voltage
> 0 [mA] = Transformer Rated Output Current
> 0 [Hz] = Mains Frequency
> 0 [volts] = Transformer Applied Voltage
> 0 [amps] = Transformer Ballast Current
> 0 [ohms] = Measured Primary Resistance
> 0 [ohms] = Measured Secondary Resistance
>
> ------------------------------**----------------------
> Transformer Outputs:
> ------------------------------**----------------------
> 0 [volt*amps] = Rated Transformer VA
> 0 [ohms] = Transformer Impedence
> 0 [rms volts] = Effective Output Voltage
> 0 [rms amps] = Effective Transformer Primary Current
> 0 [rms amps] = Effective Transformer Secondary Current
> 0 [volt*amps] = Effective Input VA
> 0 [uF] = Resonant Cap Size
> 0 [uF] = Static gap LTR Cap Size
> 0 [uF] = SRSG LTR Cap Size
> 0 [uF] = Power Factor Cap Size
> 0 [peak volts] = Voltage Across Cap
> 0 [peak volts] = Recommended Cap Voltage Rating
> 0 [joules] = Primary Cap Energy
> 0 [peak amps] = Primary Instantaneous Current
> 0 [inch] = Spark Length (JF equation using Resonance Research Corp.
> factors)
> 0 [peak amps] = Sec Base Current
>
> ------------------------------**----------------------
> Rotary Spark Gap Inputs:
> ------------------------------**----------------------
> 0 = Number of Stationary Gaps
> 0 = Number of Rotating Electrodes
> 0 [rpm] = Disc RPM
> 0 = Rotating Electrode Diameter
> 0 = Stationary Electrode Diameter
> 0 = Rotating Path Diameter
>
> ------------------------------**----------------------
> Rotary Spark Gap Outputs:
> ------------------------------**----------------------
> 0 = Presentations Per Revolution
> 0 [BPS] = Breaks Per Second
> 0 [mph] = Rotational Speed
> 0 [ms] = RSG Firing Rate
> 0 [ms] = Time for Capacitor to Fully Charge
> 0 = Time Constant at Gap Conduction
> 0 [µs] = Electrode Mechanical Dwell Time
> 0 [%] = Percent Cp Charged When Gap Fires
> 0 [peak volts] = Effective Cap Voltage
> 0 [joules] = Effective Cap Energy
> 0 [peak volts] = Terminal Voltage
> 0 [power] = Energy Across Gap
> 0 [inch] = RSG Spark Length (using energy equation)
>
> ------------------------------**----------------------
> Static Spark Gap Inputs:
> ------------------------------**----------------------
> 0 = Number of Electrodes
> 0 [inch] = Electrode Diameter
> 0 [inch] = Total Gap Spacing
>
> ------------------------------**----------------------
> Static Spark Gap Outputs:
> ------------------------------**----------------------
> 0 [inch] = Gap Spacing Between Each Electrode
> 0 [peak volts] = Charging Voltage
> 0 [peak volts] = Arc Voltage
> 0 [volts] = Voltage Gradient at Electrode
> 0 [volts/inch] = Arc Voltage per unit
> 0 [%] = Percent Cp Charged When Gap Fires
> 0 [ms] = Time To Arc Voltage
> 0 [BPS] = Breaks Per Second
> 0 [joules] = Effective Cap Energy
> 0 [peak volts] = Terminal Voltage
> 0 [power] = Energy Across Gap
> 0 [inch] = Static Gap Spark Length (using energy equation)
>
> ------------------------------**--------------------
> From: "Phil Tuck" <phil@xxxxxxxxxxx>
> Sent: Tuesday, June 18, 2013 1:11 PM
> To: "'Tesla Coil Mailing List'" <tesla@xxxxxxxxxx>
> Subject: RE: [TCML] Primary/Sec. Frequency
>
>
>>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla