To maintain resonance Cp x Lp = Vs x Ls . So if you double Co then you
need to either reduce Lp by 50% or double Cs. Tapping the primary at fewer
turns is the easiest way, but the smaller inductance means higher initial
in-rush current which can stress your caps etc. Good design is always a
balancing act.
On Sun, Mar 17, 2019, 1:58 PM Douglas Johnson <doug379306@xxxxxxxxx> wrote:
> Using Teslamap to configure a coil,if the Optimum MMC Capacitance for SG
> coil calls for 10nf,
> How Would the resulting performance of the coil be affected using a MMC of
> 20nf?
> Doug
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla